Aluminium Extrustions

All heats are checked for chemical composition using Direct Reading Vacuum Emission Spectrometer before casting the billets. The Billets in Medium and High Strength Alloys required to be extruded for Engineering, Auto sector, defense and for other stringent applications are checked with Ultrasonic Flaw Detector to ensure that there are no internal flaws.
Our testing facility is equipped with conductivity measuring equipment to determine the electrical conductivity of Bus Bars - both flat & tubular. The leakage and pressure testing facility for Irrigation Tubes enables us to supply these tubes as per BIS: 709
Testing Facilities Available

ELECTRICAL TESTS
  • Electrical Resistance Test
  • Electrical Conductivity Test
  • Temperature Rise Test
  • Heating Cycle Test
  • Magnetic Power loss Test
GALVANISING TESTS
  • Uniformity of Zinc coating Test
  • Adhesion (Peel-off) Test
  • Measurement of Zinc coating thickness
  • Weight of Zinc coating Tests
ELECTRICAL TESTS
  • Electrical Resistance Test
  • Electrical Conductivity Test
  • Temperature Rise Test
  • Heating Cycle Test
  • Magnetic Power loss Test
SPECIAL TESTS
  • Fatigue Test
  • Measurement of Resonance of Frequency.
  • Mass Pull- off test.
  • Compression & Tensile load Test for Spacers.
  • Resilience Test (for Helical products)
  • Clamp Bolt torque Test
  • Unbalanced Load Test.
MECHANICAL TESTS
  • Breaking Load / UTS Test.
  • Elongation (%) Test.
  • Torque Test.
  • Slip Strength Test.
  • Proof Load Test.
  • Hardness Tests.
    • Brinell Hardness.
    • Rockwell Hardness
    • Shore Hardness (For Elastomers)
CHEMICAL AND METALLURGICAL TESTS
  • Ultrasonic Test.
  • Magnetic Particle Inspection (MPI).
  • Dye Penetrant Test (DPT).
Non - Destructive Tests
  • Chemical Composition
  • Determined on a direct readingvacuum emission for (Spectrometer) Aluminium & Aluminium alloy Compositions.
Test to be out-sourced- carried out at internationally reputed labs/Govt. Test labs/NABL accredited labs.

ELECTRICAL TESTS
  • Corona & RIV test
  • Voltage Distribution test
  • Impulse withstanding voltage test
  • Flash over test
  • Switching surge test
  • Short- Circuit Current test
  • Short Time Cusrrent Rating test
Micro Analysis
  • Measurement of Grain size
  • Inclusion Rating
  • Forging Overlaps
  • Grain Flow
CHEMICAL AND METALLURGICAL TEST
  • Chemical Composition
  • Determined on Spectrometer or by wet analyses method
MECHANICAL TESTS
  • Damper Efficiency Test
  • Dynamic characteristic Test for Vibration Damper
News & Events
  • Upcoming Events
Powered by :Chandra Softtech